User Manual

Hi5-Plus v1.0 www.aja.com

3G-B Mode: Selects the 3G level B Video Mode. Choose from the following:

• Auto - automatically selects the format based on the input video parameters.

• Dual Link - select this when your 3G signal is carrying 444 information or 12 bit data.

NOTE: The following two settings only apply to 3G-B video in Dual Stream mode.

• 1 x HD DS1 - use only Data Stream 1 as a single video.

• 1 x HD DS2 - use only Data Stream 2 as a single video.

Output Tab Screen Click on the Output tab to view and make changes to the Hi5-Plus Output settings.

Figure 9. MiniConfig, Output Tab Screen

Output Video

Selections

Color Space: Selects the desired output video format. Choose from the following:

• Auto - selects the video format based on the input video and the attached device's

capabilities.

• 4:2:2 YCbCr

• 4:4:4 RGB

• 4:4:4 YCbCr

Bit Depth: Choose from Auto, 8-bit, 10-bit, or 12-bit. Choosing “Auto” automatically selects the bit

depth based on the input video and the attached device's capabilities.

RGB Range: Choose Auto, SMPTE or Full. Choosing “Auto” automatically selects the input color range

setting.