Specifications

8
Mini Config, Video Screen
The name of each Mini-Converter found can be seen in the menu pulldown at the top
right hand side of the screen (in the example above, it shows “Port: 0 (pilot)”. This
allows you to select a desired Mini-Converter when there are more than one.
Selecting a Mini-Converter with this dropdown menu causes this application to
connect to the selected converter. The type of Mini-Converter and serial number will
be shown in the graphic and text below it.
The Mini-Converter graphic shows Left and Right eye assignments iconically next to
the BNC and HDMI connectors. An “L” or “R” by itself means only left eye or right eye,
respectively. An “LR” together means the signal is a combined left eye/right eye
multiplexed signal. How the signal is multiplexed is defined in the text next to it as
listed in the CEA Modes Table that follows (last column in table is the mode):
Key: TB=Top/Bottom, FP=Frame-packing, and SS=Side-by-Side
Tabbed screens
Message
Showing Status
Each connector
is labelled with
the signals
currently detected
or manually
selected.
Blue = Auto
Black = Manual
selection
Select a USB
port and
an attached
Mini-Converter
(name in parentheses)
Red = No Signal or
signal output
since device not
detected
Firmware version
2xSDI 1.5gb 720p50/59.94/60 3D-TB
2xSDI 1.5gb 1080p23.98/24 3D-TB-FP
2xSDI 1.5gb 1080psf23.98/24 3D-TB-FP
2xSDI 1.5gb 1080i50/59.94
3D-SS