Specifications

1
5
AJA Hi5-3D HD-SDI Multiplexer To HDMI 1.4a and SDI Video and Audio Converter
I/O Connections
Hi5-3D Converter
Installation
Typically, Hi5-3D installation consists of the following steps:
1. Ensure the Hi5-3D is disconnected from power.
2. Connect video equipment to the convertor BNCs and HDMI connector.
3. Connect audio equipment to RCA connectors (optional)
4. Apply +5 to 20VDC power to the converter (AJA power supply model DWP or
DWP-U).
5. The Hi5-3D will now run using the default factory settings. If you wish to alter the
factory settings, you’ll need to install the AJA Mini Config software (supplied on
CD) on a computer, attach the Hi5-3D via USB to the computer, and then make
your changes. This process is detailed on the following pages.
User Controls
The Hi5-3D can be used right out of the box for many applications since it is designed
to recognize inputs and perform standard actions automatically by default. However
you can also manually configure the Hi5-3D using a supplied software application for
PCs and Macs called “Mini Config” or by setting dipswitches via a cutout on the back of
the Hi5-3D.
One of the dipswitches is a “Local/Remote” switch. When in the “Local” mode, the
remaining dipswitches support a subset of the user controls. When in the “Remote”
mode, the normal Mini-Converter non-volatile registers control the unit (as last set).
SD/HD/3G-SDI
+ 5 to 20 VDC
Power
Input
2 Channel
Unbalanced
Analog
Audio
(RCA Jacks)
Output
HDMI Connector
Input 1 BNC
SD/HD/3G--SDI
Input 2 BNC
USB
Port
Red: Lock to HD-SDI
Green: Lock to SD-SDI
Amber: Lock to 3G
LOCK LED
SD/HD/3G-SDI
Output
Note: support for 3G not present
—this will be a feature in a future firmware release.