Datasheet

| Converter Catalog Fall 2013
www.aja.com
14
The D10C SDI to Analog Converter provides excellent quality 10-bit digital to
analog conversion at low cost. The D10C is useful for D/A conversion, high-
quality monitoring, or adding an SDI input to VTRs, workstations, or other
analog video equipment. The D10C automatically works with component or
composite SDI inputs in 625 or 525 line formats. Featuring one SDI input with
two re-clocked, loop-thru SDI outputs, the D10C also acts as a distribution
amplifier/repeater. The D10C provides a component analog output for
component SDI inputs (D1), a NTSC output for 525 line composite SDI inputs
(D2, D3), and a PAL output for 625 line composite inputs SDI (D2, D3). Note:
the D10C is set to the proper format at the factory.
D10C
Composite Serial Digital (D2, D3) to Composite Analog, or SD-SDI to YPbPr or RGB Converter, 10-bit
Mini-Converters
Only $800 US MSRP*
Features at a glance
• Excellent Quality 10-bit D/A Conversion
• SD-SDI Input, 2 Re-clocked, Loop-Thru SDI Outputs
• Accepts Component or Composite SDI Inputs
(D1, D2, D3)
• YPbPr, Betacam, or RGB Component Formats
• NTSC or PAL Composite Formats (with D2/3 input)
• DWP-U-R1 Power Supply Included
• 5-year Warranty
Input:
• SD-SDI (SMPTE 259M), 1 x BNC
Outputs:
• For Component Input Only (270Mb):
YPbPr - SMPTE
• EBU-N10
• Betacam
• RGB, 3 x BNC
• Sync
• 1 x BNC
• For Composite Input Only (143/177Mb):
NTSC/PAL 1 x BNC
• Re-clocked loop-thru SDI
• 2 x BNC
D/A Converters:
• 10-bits
Frequency Response:
• Y +/- .25 dB to 5.2MHz
• C +/- .25 dB to 2.5MHz
• Less than 1% K Factor (2T)
Physical:
• 5.8" x 3.1" x 1" (147 x 79 x 25 mm)
Power:
• +5VDC Regulated
• 5 watts
Tech specs
* Pricing is for US only. International pricing will vary. Please contact a local AJA Reseller for pricing details.
Find a Reseller
Find a Reseller