Datasheet
FS2
19 | FS
www.aja.com
Video Formats
• (2K) 2048 x 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
• (HD) 1920 x 1080p 23.98, 24, 25, 29.97, 30, 50,
59.94, 60
• (HD) 1920 x 1080PsF 23.98, 24, 25, 29.97, 30
• (HD) 1920 x 1080i 25, 29.97, 30
• (HD) 1280 x 720p 50, 59.94, 60
• (SD) 625i 25
• (SD) 525i 29.97
Input Possible Outputs
525i59.94 525i59.94 720p59.94 1080i59.94
720p59.94 25i59.94 720p59.94 1080i59.94
1080i59.94 525i59.94 720p59.94 1080i59.94
1080pSF23.98 1080pSF23.98 1080i59.94 525i59.94
625i50 625i50 1080i50 720p50
720p50 625i50 1080i50 720p50
1080i50 625i50 1080i50 720p50
1080pSF24 1080pSF24 1080i60
1080i60 1080i60 720p60
720p60 720p60 1080i60
Notes:
* In the case of 1080PsF 23.98 input - and when 1080i
59.94 (or 525i) is selected as an output format, the FS2
automatically does 3:2 pulldown to get the correct frame
rate. Similarly, in the case of 1080pSF/24 input,
FS2 automatically does 3:2 pulldown to get the correct
frame rate.
** When passing 24 or 60 frame rate video, output is high
definition.
Tech Specs
Video Input Digital
• Dual 3G-SDI, SMPTE-259/292/424, 8 or 10-bits
• Dual Fiber 3G-SDI, SMPTE-297, 8 or 10-bits (optional)
• Dual Channel LC connector module
• Single Channel LC connector module
• Single Channel SC connector module
• Single Link 4:2:2 (1 x BNC each)
• HDMI v1.3 30 bits/pixel, RGB or YUV, 2.25 Gbps, SD, HD,
1080p 50/6060
Video Input Analog
• HD component YPbPr, SMPTE-274 (3 x BNC)
• 12-bit A/D, 2 x oversampling
• SD Component (3 x BNC)
• SMPTE/EBU N10, Betacam 525 line, Betacam 525J
• 12-bit A/D, 4 x oversampling
• +/- .25 dB to 5.5 MHz Y frequency response
• +/- .25 dB to 2.5 MHz C frequency response
• .5% 2T pulse response
• <2 ns Y/C delay inequity
• SD Composite
• 12-bit A/D, 4 x oversampling
Video Output Digital
• Dual SD/HD/3G SDI, SMPTE-259/292/424, 8 or 10-bits
• Dual Fiber 3G-SDI, SMPTE-297, 8 or 10-bits (optional)
• Dual Channel LC connector modules
• Single Channel LC connector module
• Single Channel SC connector module
• Single Link 4:2:2 (1 x BNC each)
• HDMI v1.3 30 bits/pixel, RGB or YUV, 2.25 Gbps, SD, HD,
1080p 50/60
Up-Conversion
• Hardware: 10-bit
• Anamorphic: fullscreen
• Pillarbox 4:3: results in a 4:3 image in center of screen
with black sidebars
• Zoom 14:9: results in a 4:3 image zoomed slightly to fill
a 14:9 image with black side bars
• Zoom Letterbox: results in image zoomed to fill full
screen
• Zoom Wide: results in a combination of zoom and
horizontal stretch to fill a 16:9 screen; this setting can
introduce a small aspect ratio change
Down-Conversion
• Hardware: 10-bit
• Anamorphic: fullscreen
• Letterbox: image is reduced with black top and bottom
added to image area with the aspect ratio preserved
• Crop: image is cropped to fit new screen size
Cross-Conversion
• Hardware 10-bit
• 1080i to 720p
• 720p to 1080i
• 720p to 1080PsF
SD to SD Aspect Ratio Conversion
• Letterbox: This transforms SD anamorphic material to a
letterboxed image
• H Crop: Will produce a horizontally stretched effect on
the image; transforms anamorphic SD to full frame
• SD Pillarbox: Will produce an image in the center of the
screen with black borders on the left and right sides
and an anamorphized image in the center
• V Crop: Will transform SD letterbox material to an
anamorphic image
Video Output Analog
• HD component YPbPr, SMPTE-274 (3 x BNC)
• 12-bit D/A, 2 x oversampling
• SD Component (3 x BNC)
• SMPTE/EBU N10, Betacam 525 line, Betacam 525J
• 12-bit D/A, 4 x oversampling
• +/- .25 dB to 5.5 mHz Y frequency response
• +/- .25 dB to 2.5 mHz C frequency response
• .5% 2T pulse response
• <2 ns Y/C delay inequity
• SD Composite
• 12-bit D/A, 4 x oversampling
Audio Input Digital
• 16-Channel, 24-bit SMPTE-272/299 SDI embedded
audio, 48 kHz sample rate, synchronous
• 16-Channel, 24-bit AES/EBU audio, 48 kHz sample rate,
synchronous or nonsynchronous, internal sample rate
conversion (8 x XLR via 25-pin breakout cable)
Audio Input Analog
• 8-Channel, 24-bit A/D analog audio, 48 kHz sample
rate, balanced (8 x XLR via 25-pin breakout cable)
• +12dBu, +15dBU, +18dBu, +24dBu (Full Scale Digital)
• +/- 0.2db 20 to 20 kHz frequency response
Audio Output Digital
• 16-Channel, 24-bit SMPTE-272/299 SDI embedded
audio, 48 kHz sample rate, synchronous
• 16-Channel, 24-bit AES/EBU audio, 48 kHz sample rate,
synchronous or nonsynchronous, internal sample rate
conversion (8 x XLR via 25-pin breakout cable)
Audio Output Analog
• 8-Channel, 24-bit A/D analog audio, 48 kHz sample
rate, balanced (8 x XLR via 25-pin breakout cable)
• +12dBu, +15dBU, +18dBu, +24dBu (Full Scale Digital)
• +/- 0.2db 20 to 20 kHz frequency response
For the most recent product specifications visit www.aja.com/products/fs2/#techspecs
Click here
(Tech Specs are Continued on Next Page)