Technical information

76 OpenBook 1849
Removing the Inverter Board
1.
See “Removing the Battery” on page 55
2.
See “Removing the Hinge Caps” on page 60
3.
See “Removing the Middle Cover” on page 60
4.
See “Removing the LCD Module” on page 65
5.
See “Removing the LCD Bezel” on page 75
6.
Remove the one screw, detach the inverter board from the LCD panel, disconnect the LCD power cable
and the inverter cable from the inverter board.
Removing the LCD
1.
See “Removing the Battery” on page 55
2.
See “Removing the Hinge Caps” on page 60
3.
See “Removing the Middle Cover” on page 60
4.
See “Removing the LCD Module” on page 65
5.
See “Removing the LCD Bezel” on page 75
6.
See “Removing the Inverter Board” on page 76
7.
Remove the four screws on the hinges as shown.
8.
Detach the LCD together with the LCD brackets from the LCD panel.