Technical information

Chapter 3 71
Removing the 2nd Fan Support Bracket
1.
See “Removing the Battery” on page 55
2.
See “Removing the Hinge Caps” on page 60
3.
See “Removing the Middle Cover” on page 60
4.
See “Removing the Keyboard Metal Bracket” on page 61
5.
See “Removing the Keyboard” on page 61
6.
See “Removing the Antennas” on page 62
7.
See “Removing the LCD Module” on page 65
8.
See “Separating the Upper Case from the Lower Case” on page 67
9.
See “Removing the 2nd Fan Support Bracket” on page 71
10.
See “Removing the CPU Heat Sink” on page 67
11.
Remove the two screw as shown, then remove the 2nd fan support bracket from the main board.
Removing the Launch Board Cable
1.
See “Removing the Battery” on page 55
2.
See “Removing the Hinge Caps” on page 60
3.
See “Removing the Middle Cover” on page 60
4.
See “Removing the Keyboard Metal Bracket” on page 61
5.
See “Removing the Keyboard” on page 61
6.
See “Removing the Antennas” on page 62
7.
See “Removing the LCD Module” on page 65
8.
See “Separating the Upper Case from the Lower Case” on page 67
9.
See “Removing the CD-ROM Bracket” on page 70
10.
Disconnect the launch board cable from the main board.
Removing the Main Board
1.
See “Removing the Battery” on page 55
2.
See “Disassembling the Optical Drive Module” on page 59
3.
See “Removing the Hinge Caps” on page 60