Technical information

62 OpenBook 1849
5.
Lift the keyboard up and put it on the upper case.
6.
Disconnect the keyboard cable from the main board by using tweezers.
7.
Remove the keyboard away.
Removing the RTC Battery
1.
See “Removing the Battery” on page 55
2.
See “Removing the Hinge Caps” on page 60
3.
See “Removing the Middle Cover” on page 60
4.
See “Removing the Keyboard Metal Bracket” on page 61
5.
See “Removing the Keyboard” on page 61
6.
Detach the RTC battery and disconnect the RTC cable from the mainboard.
NOTE:
Please make sure that you install the RTC battery immediately soon after you uninstall it to prevent the
CMOS from resetting. While you install the RTC battery back, route the RTC cable as shown.
Removing the Antennas
1.
See “Removing the Battery” on page 55
2.
See “Removing the Hinge Caps” on page 60
3.
See “Removing the Middle Cover” on page 60
4.
See “Removing the Keyboard Metal Bracket” on page 61
5.
See “Removing the Keyboard” on page 61
6.
Disconnect the two RF cables from the sockets on the wireless LAN board.