Technical information

Chapter 3 61
4.
Turn the middle over and put it on the keyboard. Disconnect the launch board cable from the middle
cover.
5.
Remove the middle cover from the main unit.
Removing the Keyboard Metal Bracket
1.
See “Removing the Battery” on page 55
2.
See “Removing the Hinge Caps” on page 60
3.
See “Removing the Middle Cover” on page 60
4.
Remove the one screw and detach the small keyboard support bracket.
Removing the Keyboard
1.
See “Removing the Battery” on page 55
2.
See “Removing the Hinge Caps” on page 60
3.
See “Removing the Middle Cover” on page 60
4.
See “Removing the Keyboard Metal Bracket” on page 61