Technical information

46 OpenBook 1849
Removing a Password
Should you want to remove a password, do the following:
1.
Use the cursor up/ down keys to highlight a password parameter (Setup, User or Hard Disk) and press the
e key. The password box appears.
2.
Enter the current password and press
e.
3.
Press
etwice without entering anything in the
Enter New Password
field and
Confirm New
Password
field to remove the existing password.
4.
Press
^ to return to the main menu.
5.
Press u. The following dialogue box appears.
6.
Select
Yes
and press
e to save the change and exit the BIOS utility.
Changing a Password
To change a password, follow these steps:
Follow these steps:
1.
Use the cursor w/y keys to highlight the Password parameter (Setup, User or Hard Disk) and press the
e key. The password box appears:
2.
Enter the current password and press
e.
3.
Type the new password. The password may consist of up to eight characters (A-Z, a-z, 0-9).
IMPORTANT:
Be very careful when typing your password because the characters do not appear on the
screen.
Set Supervisor Password
Enter New Password
[ ]
Set Supervisor Password
Enter New Password
Confirm New Password [ ]
Enter Current Password
[ ]
Set Supervisor Password
Enter New Password
[ ]
Set Supervisor Password
Enter New Password
Confirm New Password [ ]
Enter Current Password
[ ]
Setup Confirmation
Save Configuration changes and exit now?
[Yes] [No]
Setup Confirmation
Save Configuration changes and exit now?
[Yes] [No]
Set Supervisor Password
Enter New Password
[ ]
Set Supervisor Password
Enter New Password
Confirm New Password [ ]
Enter Current Password
[ ]
Set Supervisor Password
Enter New Password
[ ]
Set Supervisor Password
Enter New Password
Confirm New Password [ ]
Enter Current Password
[ ]