Technical information

Chapter 2 43
Base I/O Address Set the base I/O address for the FIR operation.
2F8
3F8
2E8
Interrupt Set the interrupt for the Com operation.
IRQ 3
IRQ 4
DMA Channel
DMA 3
DMA 1
Parallel Port Enables or disable the parallel port.
The parallel port is a PnP device. Enabled/Disabled
setting won’t affect the Windows Device Manager
setting of the parallel port.
Configure Parallel Port using options:
Disabled: No configuration
Enabled: User configuration
Auto: BIOS or OS chooses configuration
Enabled
Disabled
Mode Set the mode for the parallel port using options.
If operation mode is set to ECP DMA channel, sets
the direct memory access (DMA) channel for the
printer to operate in ECP mode. This parameter is
enabled only if operation mode is set to ECP.
Bi-directional
EPP
ECP
Output only
Base I/O Address Set the base I/O address for the parallel port.
378
278
3BC
Interrupt Set the interrupt for the parallel port.
IRQ 7
IRQ 5
Parameter Description Options