Technical information

Chapter 3 63
Removing the FDD Module
1.
See “Removing the Battery” on page 47
2.
See “Removing the Optical Drive Module” on page 51
3.
See “Removing the Hinge Caps” on page 52
4.
See “Removing the Middle Cover” on page 53
5.
See “Removing the Keyboard Metal Support” on page 54
6.
See “Removing the Keyboard” on page 54
7.
See “Removing the Keyboard Support Bracket” on page 56
8.
See “Removing the LCD Module” on page 59
9.
See “Separating the Upper Case from the Lower Case” on page 61
10.
Disconnect the FDD cable from the main board, remove the two screws and detach the FDD module from
the main unit.
Removing the HDD Guiding Chassis
1.
See “Removing the Battery” on page 47
2.
See “Removing the Optical Drive Module” on page 51
3.
See “Removing the Hinge Caps” on page 52
4.
See “Removing the Middle Cover” on page 53
5.
See “Removing the Keyboard Metal Support” on page 54
6.
See “Removing the Keyboard” on page 54
7.
See “Separating the Upper Case from the Lower Case” on page 61
8.
See “Removing the LCD Module” on page 59
9.
See “Separating the Upper Case from the Lower Case” on page 61
10.
See “Removing the FDD Module” on page 63
11.
Remove the four screws and detach the HDD guiding chassis from the main board.