Technical information

Chapter 3 61
Separating the Upper Case from the Lower Case
1.
See “Removing the Battery” on page 47
2.
See “Removing the Optical Drive Module” on page 51
3.
See “Removing the Hinge Caps” on page 52
4.
See “Removing the Middle Cover” on page 53
5.
See “Removing the Keyboard Metal Support” on page 54
6.
See “Removing the Keyboard” on page 54
7.
See “Removing the Keyboard Support Bracket” on page 56
8.
See “Removing the LCD Module” on page 59
9.
Disconnect the touch pad cable, the cover switch cable by using plastic tweezers.
10.
Release the fourteen screws from the bottom of the main unit, and the other seven screws as shown and
then remove the upper case from the main unit gently.