Technical information

Chapter 3 59
Removing the LCD Module
1.
See “Removing the Battery” on page 47
2.
See “Removing the Hinge Caps” on page 52
3.
See “Removing the Middle Cover” on page 53
4.
See “Removing the Antennas” on page 57
5.
Remove the one screw and disconnect the coaxial cable from the main board.
6.
Disconnect the inverter cable from the main board.
7.
Remove the four screws as shown.
8.
Remove the two screws from the bottom of the unit.
9.
Lift up and detach the LCD module.