Technical information

Chapter 3 57
Removing the Antennas
1.
See “Removing the Battery” on page 47
2.
See “Removing the Hinge Caps” on page 52
3.
See “Removing the Middle Cover” on page 53
4.
See “Removing the Keyboard Metal Support” on page 54
5.
See “Removing the Keyboard” on page 54
6.
Disconnect the two RF cables from the sockets on the wireless LAN board.
.
7.
Remove the two screws and detach the left antenna.
8.
Remove the two screws and detach the right antenna.
NOTE:
When attaching the antennas back to the upper case, make sure the two RF cables are routed as
shown.
NOTE:
Please ignore this step if your notebook is not equipped with antennas.