Technical information

56 OpenBook 1848
Removing the Keyboard Support Bracket
1.
See “Removing the Battery” on page 47
2.
See “Removing the Hinge Caps” on page 52
3.
See “Removing the Middle Cover” on page 53
4.
See “Removing the Keyboard Metal Support” on page 54
5.
See “Removing the Keyboard” on page 54
6.
Remove the screw, and then disconnect the LCD coaxial cable from the main board. Release the cable
from the clip as shown below.
.
7.
Disconnect the inverter cable from the main board.
.
8.
Remove the three screws and then detach the keyboard support bracket from the main unit.