Technical information

Chapter 3 55
Removing the RTC Battery
1.
See “Removing the Battery” on page 47
2.
See “Removing the Hinge Caps” on page 52
3.
See “Removing the Middle Cover” on page 53
4.
See “Removing the Keyboard Metal Support” on page 54
5.
See “Removing the Keyboard” on page 54
6.
Detach the RTC battery and disconnect the RTC cable from the mainboard.
NOTE:
Please make sure that you install the RTC battery immediately soon after you uninstall it to prevent the
CMOS from resetting. While you install the RTC battery back, route the RTC cable as shown.