Technical information

54 OpenBook 1848
Removing the Keyboard Metal Support
1.
See “Removing the Battery” on page 47
2.
See “Removing the Hinge Caps” on page 52
3.
See “Removing the Middle Cover” on page 53
4.
Remove the one screw and detach the small keyboard support bracket.
Removing the Keyboard
1.
See “Removing the Battery” on page 47
2.
See “Removing the Hinge Caps” on page 52
3.
See “Removing the Middle Cover” on page 53
4.
See “Removing the Keyboard Metal Support” on page 54
5.
Lift the keyboard up and put it on the upper case.
6.
Disconnect the keyboard cable from the main board by using tweezers.
7.
Remove the keyboard away.