Technical information

36 OpenBook 1848
Startup Configuration
The Startup Configuration screen contains parameter values that define how your computer behaves on
system startup.
The following table describes the parameters in this screen. Settings in
boldface
are the default and
suggested parameter settings.
Parameter Description Options
Legacy Diskette A Enable or Disable Legacy Diskette A
1.44/1.25MB 3 1/2”
Disabled
360Kb 5 1/4”
1.2MB 5 1/4”
720Kb 3 1/2”
2.88MB 3 1/4”
Primary Master Show IDE Primary Master Information.
User can enter submenu to set some detail functions
Secondary Master Show IDE Secondary Master Information
User can enter submenu to set some detail functions.
I/O Device Configuration Enter submenu to set I/O device configuration
Help: Pheripheral Configuration.
Hyper Threading Supports on system with Hyper-Threading CPU Enabled
Disabled
Legacy USB Support Set Enabled or Disabled USB BIOS Legacy Support.
Help: Set Enable support for Legacy Universal Serial
Bus.
Enabled
Disabled
Default Wireless Device Select wireless device radio enable by default.
Options: [Disabled]: The default state of Wireless LAN
in OS is “Off”.
[Last State]:SKeep on the final state “On/Off” of
Wireless LAN when system shut down from OS.
Disabled
Enabled
PhoenixBIOS Setup Utility
Information Main
Advanced
Security Boot Exit
Item Specific Help
Legacy Diskette A [1.44/1.25 MB 3½”]
>Primary Master [80026MB]
>Secondary Master [Optical Drive]
>I/O Device Configuration
Hyper Threading [Disabled]
Legacy USB Support : [Enabled]
Default Wireless Device [Disabled]
Selects floppy type.
Note that 1.25 MB 3½”
references a 1024
byte/sector Japanese
media format. The
1.25MB, 3½” diskette
requires a 3-mode
floppy-disk drive.
F1
Help

Select Item
F5/F6
Change Values
F9
Setup Defaults
Esc
Exit

Select Menu
Enter
Select
>
Sub Menu
F10
Save and Exit