Technical information

34 OpenBook 1848
Main System Settings
The Main System Settings screen allows you to set the system date and time.
The following table describes the parameters in this screen.
.
Parameter Description
System Time Sets the system time
Format: HH:MM:SS ( Hour : Minute : Second )
Help: <Tab>,<Shft-Tab>, or <Enter> selects field.
System Date Sets the system date.
Format: MM/DD/YYYY (Month/Day/Year)
Help: <Tab>, <Shift>, or <Enter> selects field.
Boot Display Set the display output device on boot up.
Help: Set the display output device on boot up.
When set to Auto, the computer automatically determines the display
device. If an external display device (e.g., monitor) is connected, it
becomes the boot display. When set to Both, the computer outputs to both
the LCD and the external display if one is connected.
Option: Both or
Auto
Screen Expansion Options:
Enable
or Disable.
Help: Options: Enable or Disable.
QuickBoot Mode Options:
Enable
or Disable
Help: Allow the system to skip certain tests while booting. This will
decrease the time needed to boot the system.
Boot-time Diagnostic Screen Display logo screen during boot
Options: Enable or
Disable
Help: Enable to show the Boot-time Diagnostic screen during boot up.
PhoenixBIOS Setup Utility
Inform ation M ain Advanced Security Boot Exit
Item Specific H elp System Time: [00:00:00]
System Date: [xx/xx/2004]
Boot Display [Auto]
Screen Expansion [Enabled]
QuickBoot M ode [Enabled]
Boot-time Diagnostic Screen [Disabled]
Boot on LAN [Disabled]
Hotkey Beep [Enabled]
Auto Dim [Enabled]
F12 M ulti-Boot [Enabled]
<Tab>, <Shift-Tab>, or
<Enter> selects field.
F1
Help  Select Item
F5/F6
Change Values
F9
Setup Defaults
Esc Exit  Select Menu Enter Select > Sub-Menu F10 Save and Exit