Datasheet

ENGLISH 7
Programmed play
You can arrange the playing order of up to 30 tracks on
a CD.
1
Select CD function and place the CD.
2
In stop mode, press PROGRAM.
“PROG” flashes in the display.
3
Press r or t to select a track.
4
Press s to store it.
After showing the selected track and its program
number for a few seconds, the display changes to
the new one for the next program.
5
Repeat steps 3 and 4 to program other
tracks.
6
Press PROGRAM to finish the program.
“PROG” stops flashing.
Pressing E finishes the program and starts
programmed play.
Tip
You can repeat the programmed play.
After programming, press REPEAT to display “[”.
To check the program
In stop mode, press r or t repeatedly.
The programmed track and its program number are
displayed in order.
To clear the program
In stop mode, press PROGRAM.
All the programs are cleared and the total number of the
tracks and total playing time are displayed.
To change the program
Clear the program and repeat all the steps again.
Selected track number
Program number