Datasheet

12 ENGLISH
Additional information
Troubleshooting
General
The power is not on.
•Connect the AC power code to a wall outlet securely.
•Make sure the batteries are inserted correctly.
The power is not on, and “Er” and “bAtt” are
displayed.
•Make sure the batteries are inserted correctly.
The power is not on, and “Lo” and “bAtt” are
displayed.
•Replace all the batteries with new ones.
There is no audio.
•Adjust the volume.
•Unplug the headphones when listening through the
speakers.
Noise is heard.
•Someone is using a portable telephone or other
equipment that emits radio waves near the player.
b Move the portable telephone, etc., away from the
player.
Radio
The audio is weak or has poor quality.
•Replace all the batteries with new ones if they are
weak.
•Move the player away from the TV.
The picture of your TV becomes unstable.
• If you are listening to FM radio near the TV with an
indoor antenna, move the player away from the TV.
CD Player
“noCd” is displayed even when a CD is in
place.
• Insert the CD with the label side up.
• The CD-R/CD-RW is blank.
• The CD-R/CD-RW is not finalized. Finalize the CD-R/
CD-RW with the recording device.
• There is a problem with the quality of the CD-R/CD-
RW, recording device or application software.
The CD does not play.
•Make sure that the CD compartment is closed.
•Place the CD with the label side up.
•Clean the CD.
• Take out the CD and leave the CD compartment
open for about an hour to dry moisture condensation.
The sound drops out.
•Reduce the volume.
•Clean the CD, or replace it if the CD is badly
damaged.
•Place the player in a location free from vibration.
•Clean the lens with a commercially available blower.
• The sound may drop out or noise may be heard when
using poor quality CD-Rs/CD-RWs or if there is a
problem with the recording device or application
software.