Specifications

SPECIFICATIONS
Tuner section
Frequency range
<U model> FM: 87.5-108 .O MHZ
Antenna: FM antenna
AM: 530-1,710 kHz
Antenna: Ferrite bar antenna
cLH model> FM: 87.5 -108.0 MHz
Antenna: FM/SW antenna
SW: 3.9-12.1 MHz
Antenna: FM/SW antenna
MW: 530-1,710 kHz
Antenna: Ferrite bar antenna
Deck section
Track format
4 tracks, 2 channels
Frequency range
Normal tape: 50-12,500 Hz(EIAJ)
Recording system
AC bias
Erasing system
Magnet erase
Heads
Recording/playback head (1)
Erasure head (1)
CD player section
Disc Compact disc
Scanning method
Non-contact optical scanner
(semiconductor laser)
Laser Semiconductor laser k=780nm
Rotation speed
Approx. 500-200 rpm/CLV
Error correction
Cross interleave, Reed Solomon
code
No. of channels
2 channels
DIA conversion
16-bit linear
TROUBLESHOOTING GUIDE
Common section
Speaker
77 mm cone type (2)
output
Headphones jack (stereo mini-
jack)
Power output
2W + 2W (EIAJ/8f2 DC)
Power requirements
DC 12 V using eight R14 (size C)
batteries
U model: AC 120V
LH model: AC 11 O-120V/220-
240V selectable
Power consumption
U model: 12W
LH model: 15W
Dimensions 286 (W) x 158 (H) x 237 (D) mm
Weight Approx. 2.7 kg (excluding batter-
ies)
Accessories AC cord (1)
Specifications and external appearance are
subject to change without notice.
There is constant, wave-like static.
● The radio station is not correctly tuned. ● Correct the tuning.
There is noise. ● The unit is picking up outside noise.
● Change the location or direction of the antenna.
. Turn the unit to a different orientation.
● Move the unit away from other electrical appliances,
like a TV or fluorescent lights, or move the appliances.
Tape does not run.
● The II PAUSE button was pressed. ● Press the II PAUSE button again.
Recordina is impossible.
. The erasure prevention tab of the cassette
● Cover the erasure prevention tab hole with cellophane
“.
has been broken off.
tape.
● The recording head is dirty. ● Clean the head.
Erasure is not done completely.
● The erasure head is dirty. ● Clean the head.
● A metal or chrome tape is being used.
● Sound that has been already recorded on metal (type
IV) or chrome (type II) tapes may not be erased
completely by this unit.
CD does not play. ● The disc is incorrectly placed.
● Place the disc with the label facing up.
c The disc is dirty.
● Clean the disc.
● There is condensation on the lens.
● Wait about one or two hours and try again.
● The daver is on uause.
● Press the MI PLAY/PAUSE button to release pause.
26