Specifications

1
STOP/EJECT
w
v
_J
2
**
-?2Ki)
FUNCTION
3
CSD-EX1 10U
CSD-EX11OLH
AM ‘FM
‘SW’ FM
91 1OJ-
&
BAND
BAN D
4
TUNING
Q
%
5
FM MODE
Osc
MONOO~OST
D
m
RECORDING FROM THE RADIO
Recording is done on the side facing the cassette holder.
1
2
3
4
5
Insert a cassette.
@
The side to be recorded on
Set the FUNCTION switch to RADIO.
OPE/BATT indicator lights.
Select a band.
Turn the TUNING control to tune in to a station.
Press the
● REC button to start recording.
To stop recording
Press the ■/: STOP/EJECT button.
When the end of the tape is reached
The tape stops. To record on the other side, turn the cassette over and
press the ● REC button again.
If a high-pitched sound is heard during recording from Atoll
MW*H
Set the FM MODE/OSC switch to the position that gives less noise.
Usable tapes
Use normal (type I) tapes for recording. If you use metal (type IV) or
chrome (type II)tapes, sound that has been already recorded may not
be erased completely.
● Do not set the FUNCTION switch to POWER OFFiTAPE orCD during
radio recording.
● You cannot listen to a cassette or a compact disc during radio
recording.
● If the erasure prevention tab is broken off, the ● REC button cannot
be depressed.
● The output volume and tone have no effect on recording even if they
are adjusted.
To erase the recording
1
2
3
Set the FUNCTION switch to POWER OFF/TAPE.
Insert a cassette with the side to be erased facing you.
Press the ● REC button to start erasing.
22