Operating instructions

EDITING
m
—
To change a character
Press K or M repeatedly until the
character to be changed flashes. Then
enter the desired character again.
To delete the character
Press K or m repeatedly until the
character to be deleted flashes. When the
character is flashing, press DISP/l NS, then
press M
To insert a space between the
characters
Press W or w repeatedly until the
character to the right of where the space is
to Ibeadded flashes. Press DISP/lNS, then
press FFl.
Note
● When you operate during random, repeat
c~r programmed play, the play mode
changes to normal play.
/Vote on editing
Ele sure to press ■ after operation to
turn off the display.
If the AC adaptor is disconnected or the
batteries are removed before the display
goes out, the data is not registered
correctly.
—