Operating instructions

USABLEFUNCTIONSFOR
RECORDING
Synchronized analog recording
Recording pauses when there is no sound,
and resumes automatically when the sound
begins again.
When recording a meeting , it will only
record when someone is speaking and
saves the disc space.
1 Set SYNCHROto ON.
2 Start recording.
The recording pauses when the sound
sourceisbelowa certainlevel for4 seconds
and resumes when the sound begins.
You can restart recording by pressing
-11 while in recording pause mode.
After recording, press W.
Synchronized digital recording
During digital recording from an Aiwa mini
component, the recording is always
synchronized with the operation of the
connected unit.
● Connectthe unittoan Aiwaminicomponent
with the supplied optical digital cable.
1
2
Start recording on this unit.
“No Signal” is displayed and ~
indicator blinks in the display.
Start playback of the connected mini
component.
Recording starts automatically when the
connected unit starts playback.
Recording pauses when the connected
unit pauses or stops, and resumes when
the connected unit restarts playback.
After recording, press 9.
Note
● Synchronized digital recording can be
done from a unitwith a DIGITAL OPTICAL
OUTPUT jack.
● Synchronized digital recording may not
be done from some type of Aiwa mini
component.