Operating instructions

RECORDING
Note
● Youcannotrecord onthediscforplay back
only.
● Donotremove the batteries ordisconnect
theAC adaptor while the unit is registering
the TOC data. The data will not be
registered correctly and the disc cannot
be played back.
About the recording level
The recording level is adjusted
automatically.
You can adjust the recording level during
analog recording and microphone
recording.
To record the sound source better, adjust
the recording level referring to page 30.
To
monitor the sound source in recording
Connect the supplied headphones.
Adjusting the volume does not affect the
recorded sound.
Tip
record on a previously recorded disc
If there is an unrecorded section left on the
disc, the new recording automatically starts
from where the previous recording finished.
If there is not enough unrecorded section
left, or you want to record after erasing
previous recordings, erase the recording
referring to page 62.
To
prevent the accidental erasure of
recorded material +
❑
Slide the record-protect tab as illustrated.
Slide the tab so that it is completely locked.
TO protect the recorded contents + @
TO record + @
If recording or editing is attempted when
the tab is set to the protect position,
“F)ROTECTED appears and the operations
are deactivated.