570CDCMP3
c d OPERATING INSTRUCTIONS MANUAL DE INSTRUCCIONES MODE D’EMPLOI CDC-MP3 YU STEREO CAR CD RECEIVER RADIO-CD ESTEREOFONICO PARA AUTOMOVIL ENGLISH ESPAÑOL FRANÇAIS OWNER’S RECORD For your convenience, record the model number and serial number (you will find them on the right side of your set) in the space provided below. Please refer to them when you contact your AIWA dealer in case of difficulty. Model No. CDC-MP3 Serial No.
Welcome Thank you for your purchasing this AIWA product. To optimize the performance of this unit, please read through this manual carefully. In addition to this operating instructions manual, be sure to refer to the separate installation and connections manuals as well. • Do NOT expose the CD to direct sunlight or excessive heat. • Clean the CD before playback. Wipe the CD from the center outward with a cleaning cloth.
TABLE OF CONTENTS PARTS AND CONTROLS .................................................................................................................. 3 DETACHING AND ATTACHING THE FRONT PANEL ...................................................................... 4 SETTING THE CLOCK ....................................................................................................................... 5 RADIO OPERATION .........................................................................................
PARTS AND CONTROLS Front panel Display window Rear panel Front panel Display window 1 PWR (power on/off)/MUTE button 2 FUNCTION button 3 TUNE i/t (forward skip) button 4 TUNE k/r (back skip) button 5 DISP (display) button 6 OPEN button 7 A.ME (Auto Memory)/PS (Preset Scan) button 8 SELECT button 9 Jog Dial 0 Preset station buttons 1 – 6 ! ALBUM/DISC M button @ ALBUM/DISC N button # INT (intro) button $ REP (repeat) button* % REP1 (repeat 1) button ^ RANDOM button & AUX IN jack (3.5-mm dia.
DETACHING AND ATTACHING THE FRONT PANEL Attaching the front panel 1 Fit the lower side of the front panel to its hinge pegs as illustrated 1 – 2. 2 Close the front panel. You can detach the front panel from the unit and carry it with you when you leave your car unattended. When you carry the front panel out of your car, use the supplied carrying case. 1 Press and hold PWR for more than 2 seconds to turn the unit off. 2 Press OPEN to open the front panel and pull it out as illustrated 1 – 3.
SETTING THE CLOCK RADIO OPERATION To turn the unit on You can turn the unit on by pressing any button on the front panel except OPEN and the Jog Dial. 1 1 Press FUNCTION repeatedly to select the band from among F1 (FM1), F2 (FM2), F3 (FM3), A1 (AM1) and A2 (AM2). The band indications appear cyclically in order. • F1, F2 and F3 share the same frequency range. • A1 and A2 share the same frequency range. With the unit on, press and hold SELECT for more than 2 seconds until the clock indication appears.
PRESETTING STATIONS To preset stations automatically (Auto Memory) To turn the unit off Press and hold PWR for more than 2 seconds. If you press this button for less than 2 seconds, it functions as MUTE. Note The unit turns on in the last mode selected when you turned off the unit. LO (local/DX) button You can use Local mode when you wish to tune in only strong stations during seek tuning. In Radio mode, press LO to select Local mode. The “LO” indicator lights up.
PRESETTING STATIONS To tune in a preset station To preset stations manually You can manually preset stations that have not been selected by an auto memory operation. 1 Press FUNCTION repeatedly to select the band from among F1 (FM1), F2 (FM2), F3 (FM3), A1 (AM1) and A2 (AM2). 2 Tune in the station that you wish to preset with TUNE i or TUNE k. 3 Press and hold one of the preset station buttons 1 to 6 for approximately 2 seconds.
MY INFORMATION SWITCH You can timer-activate the radio for up to two daily radio programs. The unit turns on and off in Radio mode at the preset turn-on and turn-off times automatically. 4 Set the time you wish the unit to turn on in Radio mode. Press TUNE i, then rotate the Jog Dial to set the hour. Press TUNE k, then rotate the Jog Dial to set the minute. 5 Press SELECT. The “BAND SEL” indication flashes. Press SELECT again. The radio indication flashes.
MY INFORMATION SWITCH Activating the timer You can activate the timer for program 1 and/or program 2. 1 With the unit on, press INFO. The “PRG1 ON” or “PRG1 OFF” indication (the current setting for program 1) appears. 2 Press TUNE i or TUNE k repeatedly until the “PRG1 ON” indication flashes. 3 Press INFO. The “PRG2 ON” or “PRG2 OFF” indication (the current setting for program 2) appears. 4 5 Press TUNE i or TUNE k repeatedly until the “PRG2 ON” indication flashes. Press INFO to activate the timer.
CD PLAY You can play a CD, CD-R, or CD-RW by following the procedure below. Button operations in CD Play mode Press z 1 To Eject a CD. t Skip to the next track with a short press (for less than 0.5 second). Each extra press skips forward one extra track. To search forward rapidly, press and hold t until the desired part is played, then release it. r Restart the track currently in play with a short press (for less than 0.5 second). Each extra press skips backward one extra track.
CD PLAY Intro play Press INT during CD play. The “SCAN” indication lights up, and the first 10 seconds of all the tracks on the CD are played in order. MP3 PLAY You can play MP3 files* written on CD-ROMs, CD-Rs, or CD-RWs by following the procedure below. * In the following, “track” and “album” mean “MP3 file” and “folder” in PC terminology, respectively. When the desired track is found, press INT again. The unit returns to normal CD play. Repeat play Press REP1 during CD play.
Elapsed playing time After playing a track, the unit plays the next track of the same album. After playing all the tracks of the album, the unit plays the first track of the next album. Notes • If a disc is already inserted, press FUNCTION repeatedly to select CD Play mode to start MP3 play. • Be sure to close the front panel after inserting or ejecting a disc. Notes • It may take 2 minutes or more to scan a disc, depending on the complexity of the folder tree.
SOUND ADJUSTMENTS 1 Press SELECT repeatedly to select the mode that you wish to adjust from: BASS, TRE (treble), BAL (balance), FAD (fader) and VOL (volume). H-BASS (High BASS) You can enjoy music with strong bass sound. 1 Press SELECT repeatedly to select H-BASS (High BASS) mode. 2 Rotate the Jog Dial to select the bass sound level. Each time you press SELECT, one of the following indicators appears, in cyclic order.
DSSA (Drivers Sound Stage Adjustment) You can adjust the sound stage and tone balance to best serve a particular seat in the car. 1 Press SELECT repeatedly to select DSSA (Drivers Sound Stage Adjustment) mode. Source Level Adjuster You can adjust the output level in each mode to equalize the volume level. 1 Press FUNCTION repeatedly to select the desired mode. 2 Press DISP while pressing SELECT. The “LEVEL 0” indication appears. 2 Rotate the Jog Dial to select the position of sound stage.
CD CHANGER PLAY You can play CDs with this unit by connecting the optional AIWA CD changer. Make sure that the disc magazine loaded with the CDs is inserted in the connected CD changer. To install the unit, refer to the separate Installation and Connections manual. To switch modes To switch to another mode, press FUNCTION. To skip tracks 1 Press FUNCTION repeatedly to select CD Changer Play mode to start playing from the CD.
Random play (with optional AIWA CD changer only) Press RANDOM (the “RANDOM” indication appears). All the tracks on the current CD are played in random order. To cancel Random play, press RANDOM again. CONNECTING A PORTABLE CASSETTE/ MD/MP3 PLAYER OR OTHER EQUIPMENT This unit is equipped with a line-level input (AUX IN) jack, enabling high sound quality. 1 Connect a portable cassette/MD/MP3 player, etc. via the AUX IN jack (3.5-mm dia.) of the unit. 2 Press FUNCTION repeatedly to select AUX IN mode.
SETTING THE BEEP TONE The unit is preset at the factory to beep each time you press any button on the front panel except OPEN (no beep with the Jog Dial). You can mute this beeping by following the procedure below. SETTING THE CONTRAST CONTROL You can change the contrast of the display. 1 1 2 3 With the unit off, press and hold SELECT for more than 2 seconds. Rotate the Jog Dial to select “BEEP ON” or “BEEP OFF”. Press SELECT. The unit turns off.
DESCRIPTIONS OF MP3 Notes on MP3 • An MP3 file stores audio data compressed using MPEG1, the audio layer-3 file-coding scheme. We call files that have the “.mp3” extension “MP3 files.” • The unit can read MP3 files written in the format compliant with ISO 9660. However it does not support the MP3 data copied using a packet writing utility. • The unit cannot read an MP3 file that has a file extension other than “.mp3.” • If you play a non-MP3 file that has the “.mp3” extension, you may hear some static.
• There may be cases in which the infrared signal does not reach the infrared receptor on the main unit, depending on the installation location. • Do NOT install the remote control unit on the outer rim of the steering wheel. Doing so may hinder steering and cause a traffic accident. Be sure to install the remote control unit on the inner rim of the steering wheel.
Setting up the remote control unit Installing the remote control unit Replacing the battery Installation in a vehicle with left-hand drive 1 1 Pull out the battery holder, gripping the claw B while pressing the groove A to the right to remove the lithium battery. Attach the belt d to the inner belt holder e. Steering-wheel-mounted remote control unit Lithium battery (CR2025) Battery holder 2 Install a new lithium battery with the + side facing upward in the battery holder.
STEERING-WHEEL-MOUNTED REMOTE CONTROL UNIT 2 Wind the belt d around the rim of the steering wheel and fit the holder’s claws into the holes of the belt to secure the holder. The excess must be trimmed off, as illustrated. 3 Attach the outer belt holder f securely to the inner belt holder. 4 Attach the remote control unit to the belt holder.
Remote control button TROUBLESHOOTING Error codes In the following cases the corresponding error code indication appears. Follow the suggestions below to solve the problem. If the error code indication does not disappear, consult an AIWA service center. 1 VOLUME + button To increase the volume. 2 VOLUME - button To decrease the volume. 3 FUNCTION button To select Radio, CD Play, CD Changer Play or AUX IN mode. 4 DISC/PRESET M button CD: Press and release to skip back to the beginning of the current track.
MAINTENANCE SPECIFICATIONS Cleaning the front panel RADIO SECTION When the front panel is soiled, wipe the surface of the panel with a soft, dry cloth. (FM) Cleaning the connector The connector on the reverse side of the front panel needs to be cleaned occasionally. Wipe the surface of the connector with a cotton swab slightly moistened with alcohol. Frequency Range: 87.5 MHz – 108 MHz (100-kHz steps)* 87.5 MHz – 108 MHz (50-kHz steps)* Usable Sensitivity: 12.7 dBf 50 dB Quieting Sensitivity: 17.
GENERAL Power-Supply Voltage: 14.4 V (11 to 16 V allowable), DC, negative ground Load Impedance: 4Ω Tone Control: Bass ±10 dB at 100 Hz Treble ±10 dB at 10 kHz Preamp Output Voltage (load impedance): 2.2 V (10 kΩ) Installation size: 182 (W) × 53 (H) × 155 (D) mm (7 1/4 (W) × 2 1 /8 (H) × 6 1 /8 (D) inches) Accessory supplied: Carrying case (1) STEERING-WHEEL-MOUNTED REMOTE CONTROL UNIT Dimensions : Weight: Accessory supplied: approx.
