INSTRUCTION MANUAL AIR 88 AIR 89
NOTICE Please retain these instructions for future reference. Firmly secure all bolts,screws and knobs before use. Reconfirm that all bolts,screws,and knobs are secure every 90 days. Fasten screws loosely during initial assembly. Do not fully tighten screws until the item is completely assembled. Do not use or store this item in the proximity of open flame or flammable/combustible chemicals. Be aware that some parts are heavy and have sharp edges. Be aware that moving parts can injure,crush and cut.
TOOLS REQUIRED PHILLIPS SCREWDRIVER DRILL (RECOMMENDED) 2PERSON ASSEMBLY APPROXIMATELY 30MIN. ASSEMBLY HARDWARE M6.0x30mm SCREW M6.0x30mm BOLT 2PCS 10PCS P1 P2 M6.0x14mm SCREW M3.5x50mm SCREW 2PCS 2PCS+1spare P3 P4 M3.5x35mm SCREW M3.5x40mm SCREW 12PCS+1spare 4PCS+1spare P5 P6 M3.0x35mm SCREW M3.
PARTS Left side metal bar- house 2PCS Right side metal bar-house 2PCS Plastic feet 6PCS B A C Back panel Left panel Right panel 1PC 1PC 1PC E D Front panel PVC curtain 1PC 03 Left side metal barbalcony 1PC 1PC G F H I
PARTS Bottom frame - balcony 1PC Right side metal barbalcony 1PC J Right side metal bar- roof of balcony 1PC K Left side bottom panel house 1PC M Right side bottom - house 1PC O Left side roof 1PC 4PCS P L N Roof supporter Bottom - balcony 1PC Left side metal bar- roof of balcony 1PC Q R 04
PARTS Roof cap 1PC Right side roof 1PC S 05 T
PRODUCT ASSEMBLY 01 02 Attach metal bars Part A and B into the slot of Part C. (Repeat the same way for second leg Part A & B) A B C C Attach the back panel Part D to the side panels Part E and F with the metal bars Part A & B by 4xP2 screws.
PRODUCT ASSEMBLY 03 Screw the curtain Part G to the INSIDE of Part H by 4xP8 screws. G P8 X 4 H 04 Attach the Part H with the metal bars Part A and B by 4xP2 screws.
PRODUCT ASSEMBLY 05 Attach metal bars Part I and J into the slot of Part C. J I C C 06 Attach the metal bars Part I and J to the bottom frame Part. K. (Note that the lower side inside the Part K is connected to the metal bar.
PRODUCT ASSEMBLY 07 Attach the frame to the house by 2XP2 screws. P2 X2 08 Connect Part L and M by 2XP4 screws.
PRODUCT ASSEMBLY 09 Attach Part L and M to metal bars by 2XP1. P1 X2 10 Put down the bottom floor Part N & O.
PRODUCT ASSEMBLY 11 Put down the bottom floor Part P. P 12 Fix the bottom floor by 4XP6 screws.
PRODUCT ASSEMBLY 13 Attach Part Q to the inside of roof Part R and S by 12XP7. S R Q 14 R P7 X12 Attach the roof Part R and S to the house by 8xP5 screws.
PRODUCT ASSEMBLY 15 Fix the roof by 4XP5 screws. P5 X4 16 Attach the roof cap Part T by 4XP8 screws.
WARNING Manufacturer and seller expressly disclaim any and all liability for personal injury,property damage or loss,whether direct,indirect,or incidental,resulting from the incorrect attachment,improper use,inadequate miantenance,or neglect of this product.
