INSTRUCTION MANUAL AIR 80 AIR 81 www.aivituvin.
NOTICE Please retain these instructions for future reference. Firmly secure all bolts,screws and knobs before use. Reconfirm that all bolts,screws,and knobs are secure every 90 days. Fasten screws loosely during initial assembly. Do not fully tighten screws until the item is completely assembled. Do not use or store this item in the proximity of open flame or flammable/combustible chemicals. Be aware that some parts are heavy and have sharp edges. Be aware that moving parts can injure,crush and cut.
TOOLS REQUIRED PHILLIPS SCREWDRIVER DRILL (RECOMMENDED) 2PERSON ASSEMBLY APPROXIMATELY 30MIN. ASSEMBLY HARDWARE M6.0x30mm SCREW M6.0x55mm BOLT 4PCS 8PCS P1 P2 M3.5x35mm SCREW M3.0x34mm SCREW 8PCS+1spare 12PCS+1spare P3 P4 M3.0x18mm SCREW M3.
PARTS Back metal bar-left 1PC Back metal bar-right 1PC Plastic feet 4PCS B A C Back panel Side panel Front metal bar-left 1PC 2PCS 1PC E D Front metal bar-right 1PC G 03 Front panel 1PC F PVC curtain 1PC H I
PARTS Roof supporter Roof 2PCS Bottom panel 2PCS J 2PCS K Right panel of porch Left panel of porch 1PC Roof cap 1PC M Left metal bar of porch 1PC P L 1PC N Right metal bar of porch 1PC Q O Bottom panel of porch 1PC R 04
PRODUCT ASSEMBLY 01 02 Attach the plastic feet Part C to the metal bars Part A & B with the buckle. A B C C Attach the panel Part E & Part D with the metal bars Part A & B by 4xP2 screws.
PRODUCT ASSEMBLY 03 Attach the plastic feet Part C to the metal bars Part F & G with the buckle. F G C C 04 Screw the curtain Part I to the INSIDE of Part H by 3xP5 screws.
PRODUCT ASSEMBLY 05 Attach the Part H to the house with the metal bars Part F & G by 4XP2 screws. E E 06 07 P2 X4 H Put down the bottom floor Part J.
PRODUCT ASSEMBLY 07 Screw Part L INSIDE of Part K by 6XP4 screws. (There are pre-drilled holes on Part K). K P4 X6 Lx2 08 Attach Part K to the house by 8xP3 screws.
PRODUCT ASSEMBLY 09 Attach Part M to the roof by 4xP5 screws. P5 X4 10 M Attach the panel Part N & Part O with the metal bars Part P & Q by 2xP5 screws on each side.
PRODUCT ASSEMBLY 11 Attach Part R by 4xP1 bolts. P1 X4 R 12 Attach the porch to the house using the P7 connection strap by 3xP6 screws on each side.
WARNING Manufacturer and seller expressly disclaim any and all liability for personal injury,property damage or loss,whether direct,indirect,or incidental,resulting from the incorrect attachment,improper use,inadequate miantenance,or neglect of this product.
