I NSTRUCTION MANUAL AIR 60 www.aivituvin.
NOTICE Please retain these instructions for future Firmly secure all bolts,screws and knobs before use. Reconfirm that all bolts,screws,and knobs are secure every 90 days. Fasten screws loosely during initial assembly. Do not fully tighten screws until the item is completely assembled. Do not use or store this item in the proximity of open flame or flammable/combustible chemicals. Be aware that some parts are heavy and have sharp edges. Be aware that moving parts can injure,crush and cut.
TOOLS REQUIRED PHILLIPS SCREWDRIVER DRILL (RECOMMENDED) 2PERSON ASSEMBLY APPROXIMATELY 60MIN. ASSEMBLY HARDWARE M3.5x60 mm SCREW 4PCS+1 spare M3.5x35 mm SCREW 8PCS+1 spare P2 M3.0x16 mm SCREW 4PCS+1 spare P4 M4.
PARTS 1PC N Left pen panel (outside) 1PC O Right pen panel (outside) 1PC Q Roof of pen 2PCS T 03 Right pen panel (close to the hutch) 1PC Left pen panel (close to the hutch) 1PC Bottom plate P Side panel of pen 1PC R S
PRODUCT ASSEMBLY 01 Attach Part O& P to Part N by 4xP8 screws. N P O P8 X4 02 Attach Part Q& R by 4xP2 screws.
PRODUCT ASSEMBLY 03 Attach front panel Part S by 4xP8 screws. P8 X4 S 04 Attach pen roof 2xPart T by 8xP4 screws.
PRODUCT ASSEMBLY 05 Attach the lock P9 by 4XP6.
WARNING Manufacturer and seller expressly disclaim any and all liability for personal injury,property damage or loss,whether direct,indirect,or incidental,resulting from the incorrect attachment,improper use,inadequate miantenance,or neglect of this
