I NSTRUCTION MANUAL AIR46 www.aivituvin.
NOTICE Please retain these instructions for future Firmly secure all bolts,screws and knobs before use. Reconfirm that all bolts,screws,and knobs are secure every 90 days. Fasten screws loosely during initial assembly. Do not fully tighten screws until the item is completely assembled. Do not use or store this item in the proximity of open flame or flammable/combustible chemicals. Be aware that some parts are heavy and have sharp edges. Be aware that moving parts can injure,crush and cut.
TOOLS REQUIRED PHILLIPS SCREWDRIVER DRILL (RECOMMENDED) 2PERSON ASSEMBLY APPROXIMATELY 60MIN. ASSEMBLY HARDWARE M4.0x45 mm SCREW 28PCS+1 spare M3.5x60 mm SCREW 24PCS+1 spare P1 M3.5x50 mm SCREW 37PCS+1 spare P2 M3.5x35 mm SCREW 8PCS+1 spare P3 M3.5x25 mm SCREW 56PCS+1 spare P4 M3.
HARDWARE R2 Q2 P2 R1 Q1 P1 03
PARTS CARTON 1/5 Right panel of coop Left panel of coop Right bottom panel of coop 1PC 1PC 1PC A1 Left bottom panel of coop 1PC D2 1PC V 04 D1 A2 Bottom panel of nesting box Ramp 2PCS 1PC G O
PARTS CARTON 2/5 Pen panel Pen panel Pen panel 1PC 1PC 1PC Inner roof of pen Middle roof of pen 1PC 1PC T R1 P2 P1 Hardware bag U 05
PARTS CARTON 3/5 Roof of nesting box PVC Waterproof Strip Right/Leftroof of coop 2PCS 2PCS 2PCS L Pen panel Back pen panel 1PC 1PC Q1 06 M N Roof cap 2PCS S W
PARTS CARTON 4/5 Front panel of coop Back panel of coop Side panel of nesting box 1PC 1PC 2PCS B2 B1 Side panel of nesting box Pen panel 2PCS 1PC F2 F1 Q2 07
PARTS CARTON 5/5 Front bottom panel of coop Front panel of nesting box 1PC 2PCS C 4PCS H E Round Perch of coop Perch of pen Perch of coop 3PCS 2PCS 1PC I2 I1 J Tray Pen panel Connect bar 1PC 1PC 10PCS K 08 Divider of nesting box R2 X
PARTS Waterproof PVC 1PC Y 09
PRODUCT ASSEMBLY 01 ① Attach the part A1, part D1 by 2 X P2 screws. ② Attach the part A2, part D2 by 2 X P2 screws. A2 A1 A2 with perch groove P2 X2 P2 X2 D1 D2 02 Then attach the part B1, part B2,part C to the step 1 by 16 X P1 screws.
PRODUCT ASSEMBLY 03 ① Slide in the tray Part K. ② Insert the perches 3xPart I1 into the slots inside the left and right panel of coop. I1x3 K 04 Attach the perch Part J to the slots inside the front and right panel by 1XP3 screws each side.
PRODUCT ASSEMBLY 05 Attach the side panels of nesting box Part F1 & F2 to the coop by 6XP3 screws. F1 P3 X6 06 F2 Attached the front panel of nesting box Part E to the side by 6XP1 screws.
PRODUCT ASSEMBLY 07 Attach the another side panels of nesting box Part F1 & F2 to the coop by 6XP3 screws. F2 08 F1 P3 X6 Attached the front panel of nesting box Part E to the side by 6XP1 screws.
PRODUCT ASSEMBLY 09 ① Drop in the bottom panel of nesting box Part G. ② Slide in the divider 2 x Part H each side. Hx2 G 10 G Hx2 Attach the roof of nesting box 2 X Part L to the nesting box by 6XP6 screws each side.
PRODUCT ASSEMBLY 11 Attach the lock 2 X P8 to the nesting box by 6XP6 screws each side. P8 X1 P8 X1 P6 X6 12 P6 X6 Attach the coop roof 2xPart N to the coop by 8XP4 screws.
PRODUCT ASSEMBLY 13 ① Put the Waterproof pvc P9 in the connection position of 2 roof cap to avoid the water leakage. ② Then attached the roof cap 2 x Part W by 8XP5 screws. Wx2 P5 X8 P9 14 ① Attach the pen panel Part P1 to the coop by 3XP2 screws. ② Attach metal rod Part P7 to the back panel of coop by 2xP6 screws.
PRODUCT ASSEMBLY 15 Attach the bottom connecting bars Part X by 4XP5 screws, the position is shown in the picture. X P5 X4 16 ① Attach the pen panel Part P2 to the coop by 3XP2 screws. ② Attach the bottom connecting bars Part X by 4XP5 screws, the position is shown in the picture.
PRODUCT ASSEMBLY 17 Attach the ramp Part O to the coop by 4XP6 screws. P6 X4 O 18 Attach the perch Part I2 into the slots inside the inner pen panel Part P1&P2 by 2XP3 screws.
PRODUCT ASSEMBLY 19 Attach pen panel Part Q1 & Q2 by 6XP2 screws. Q1 P2 X6 20 Q2 Attach the up and down four connecting bars Part X by 4XP5 screws each, the position is shown in the picture.
PRODUCT ASSEMBLY 21 Attach pen panel Part R1 & R2 to the coop by 6XP2 screws. P2 X6 R1 22 R2 ① Attach the up and down four connecting bars Part X by 4XP5 each, the position is shown in the picture. ② Attach the perch Part I2 into the slots inside the inner pen panel Part R1 & R2 by 2XP3 screws.
PRODUCT ASSEMBLY 23 Attach the back pen panel Part S to the pen by 6XP3 screws. P3 X6 S 24 Attach the pen roof Part T & Part U & Part V by 13XP3 screws.
PRODUCT ASSEMBLY 25 Fix the middle roof panel to the side roof panels by 2XP2 screws.
PRODUCT ASSEMBLY 26 Attached PVC Waterproof Strip Part M to the right side nesting box by 4XP5 screws.
PRODUCT ASSEMBLY 27 Attached PVC Waterproof Strip Part M to the left side nesting box by 4XP5 screws.
WARNING Manufacturer and seller expressly disclaim any and all liability for personal injury,property damage or loss,whether direct,indirect,or incidental,resulting from the incorrect attachment,improper use,inadequate miantenance,or neglect of this
