INSTRUCTION MANUAL AIR14 www.aivituvin.
NOTICE Please retain these instructions for future reference. Firmly secure all bolts,screws and knobs before use. Reconfirm that all bolts,screws,and knobs are secure every 90 days. Fasten screws loosely during initial assembly. Do not fully tighten screws until the item is completely assembled. Do not use or store this item in the proximity of open flame or flammable/combustible chemicals. Be aware that some parts are heavy and have sharp edges. Be aware that moving parts can injure,crush and cut.
TOOLS REQUIRED PHILLIPS SCREWDRIVER DRILL (RECOMMENDED) 2PERSON ASSEMBLY APPROXIMATELY 30MIN. ASSEMBLY HARDWERE M4.0x40mm SCREW 4PCS+1 spare M3.5x45mm SCREW 12PCS+ +1 spare P2 P1 M3.5x25mm SCREW 4PCS ++ 1spare M3.
PARTS PVC curtain 2PCS Front panel A Down panel- Right side 1PC B Layer panel- Down 1PC I Upper panel- Right side 1PC F Roof 1PC J D C Layer panel- Upper Left panel 1PC Back panel 1 PC E 03 Roof Overhang 2PCS 1 PC 1PC G H
PRODUCT ASSEMBLY 01 ① Screw the curtain Part A to the INSIDE of Part B by 2xP4. ② Screw Part C to the INSIDE of Part B by 2xP1. B P1 X2 A C P4 X2 02 ① Screw the curtain Part A to the INSIDE of Part D by 2xP4. ②Screw Part C to the INSIDE of Part D by 2xP1.
PRODUCT ASSEMBLY 03 Screw Part B, F, G and the right panel by 6xP2 on each side. F P2 X6 G 04 B P2 X6 Slide in the two layer panels.
PRODUCT ASSEMBLY 05 Attach the roof Part J by 3xP4. J 06 P3 X4 Attach 4pcs of P4 to the feet of the cat house.
WARNING Manufacturer and seller expressly disclaim any and all liability for personal injury,property damage or loss,whether direct,indirect,or incidental,resulting from the incorrect attachment,improper use,inadequate miantenance,or neglect of this product.
