INSTRUCTION MANUAL X AIR 02 www.aivituvin.
NOTICE Please retain these instructions for future reference. Firmly secure all bolts,screws and knobs before use. Reconfirm that all bolts,screws,and knobs are secure every 90 days. Fasten screws loosely during initial assembly. Do not fully tighten screws until the item is completely assembled. Do not use or store this item in the proximity of open flame or flammable/combustible chemicals. Be aware that some parts are heavy and have sharp edges. Be aware that moving parts can injure,crush and cut.
TOOLS REQUIRED PHILLIPS SCREWDRIVER DRILL (RECOMMENDED) 2PERSON ASSEMBLY APPROXIMATELY 45MIN. ASSEMBLY HARDWARE M3.5x40mm SCREW 14PCS+1 spare M3.5x50mm SCREW 6PCS+1 spare P1 P2 M3.5x25mm SCREW M3.5x35mm SCREW 18PCS+1 spare 12PCS+1 spare P3 P4 SPRING LATCH 3PCS M3.
PARTS Front panel of hutch 1PC Back panel of hutch Front panel of pen 1PC 1PC A Back panel of pen 1PC B Middle access door panel 1PC Side panel of hutch 1PC D C F E Side panel of pen Plastic tray Splayed supporting bar 1PC 1PC 1PC G 03 H I
PARTS Roof cap of pen Roof of pen 2PCS Roof of hutch 2PCS J Roof cap of hutch 1PC 1PC K Roof connect slat ( Only for 2 hutches combination.
PRODUCT ASSEMBLY 01 02 ① Attach the front Part A,the back Part B to Part E & F by 10xP2. ②Notice to align with the dowels. B E F A P2 X10 Silde in the plastic tray Part H.
PRODUCT ASSEMBLY 03 04 Screw the ramp Part O to the bottom half of lower panel on Part F by 4xP5. Screw the splayed supporting bar Part I by 2xP3.
PRODUCT ASSEMBLY 05 Attach the front and back pen panel Part C & D to the hutch by 4xP1. P1 X4 D 06 C Attach the side pen Part G by 4xP2.
PRODUCT ASSEMBLY 07 Screw the pen roof panels Part K to the pen by 8xP3. Kx2 P3 X8 08 Ensure the top roof panels line up with each other before screwing Part L by 4xP4.
PRODUCT ASSEMBLY 09 Screw the roof panels Part J to the hutch by 8xP3. Jx2 P3 X8 10 Ensure the top roof panels line up with each other before screwing Part M by 4xP4.
PRODUCT ASSEMBLY 11 Attach the spring latch P6 to the doors by 2xP5 each.
Notice Read Before Assemble! ① Pls ignore the following for only one hutch owner ! ② There are 2 different combinations for your optional choice.
OPTION 1 12 ① Take out the lock of 1st hutch. ② Push upward the hinge to take out the door. Push upward to take out 13 ① Repeat Step 1 to Step 11 to assemble 2nd hutch. ② Take out the lock. ③ Screw out the hinge to take out the door of 2nd hutch. Screw out the hinge to take out the door.
PRODUCT ASSEMBLY 14 Attach the 1st hutch to 2nd hutch by 2xP1. P1P1X2 15 Repeat the combination assembly in the opposite side by 2xP1.
OPTION 2 16 ① Take out the lock of 1st hutch. ② Push upward the hinge to take out the door. Push upward to take out 17 ① Attach the front Part A, the back Part B to the sides Part F & E by 10xP2.
PRODUCT ASSEMBLY 18 Slide in the plastic tray Part H. H 19 Screw the ramp Part O to the bottom half of lower panel on Part F by 4xP5.
PRODUCT ASSEMBLY 20 Screw the splayed supporting bar Part I by 2xP3. I P3 X2 21 Attached the front and back pen panel Part C & D to the hutch by 4xP1.
PRODUCT ASSEMBLY 22 23 Attach the side panel Part G by 4xP2. G P2 X4 ① Take out the lock. ② Push upward the hinge to take out the door.
PRODUCT ASSEMBLY 24 ① Screw the roof panels Part J & K to the hutch and pen by 8xP3 each. ② Attach the spring latch P6 to the door by 2xP5 each. Jx2 P3 X16 Kx2 P5 X4 P5 6 X2 25 Ensure the top roof panels line up with each other before screwing Part L & M by 4xP4 each. (Finish here for second hutch assemble) .
PRODUCT ASSEMBLY 26 ① Attach the 1st hutch to 2nd hutch by 2xP1. ② Attach the roof connect slat by 8xP4. ③ Attach the spring latch P6 the door by 2xP5.
PRODUCT ASSEMBLY 27 Repeat the combination assembly in the opposite side by 2xP1.
HELP CENTER Question about your product? we're here to help contact us via service@aivituvin.com ? Product inquiry Orders FAQ Product Assembly Returns & Refunds THANK YOU Thanks for your support to Aivituvin. Your satisfaction is our #1 priority. Once the items are received, opened, and deemed to be faulty or other problems. Pls contact us at service@aivituvin.com for the solution. We will feedback to you within 24 hours.
WARNING Manufacturer and seller expressly disclaim any and all liability for personal injury,property damage or loss,whether direct,indirect,or incidental,resulting from the incorrect attachment,improper use,inadequate miantenance,or neglect of this product.
