User manual

- 3 -
Technical Data
Description
This car radio panel is required for the installation of a car radio according to the Double ISO Standard
Fiat Stilo
Colour: anthracite
Internal dimensions: 182 mm x 100 mm
Installation Manual
Prior to installation, please take out the ignition key and switch off all loads.
Cassette or CD still in the OEM radio?
1. Remove the OEM radio using the release bracket (part no.: 530251)
2. Put the latches onto the DIN ISO panel.
3. After adapting the double DIN radio (see pages 5 + 6), insert the double DIN framing and secure
with the original screws.
4. If necessary, also adapt the cabling to the double DIN radio.
5. Connect the cable to the double DIN radio.
6. Push the double DIN radio into the opening and let it snap into place.