User's Manual

12
080-00001-00 AITEK USER MANUAL
Proprietary of Aitek Inc
APPENDIX – A
Important Safety Information - Read First
Before installing, configuring, or operating any equipment, Aitek recommend user to access and read all relevant technical documentation. Aitek
technical documentation can be found at Aiteks.com. Read and understand all safety instructions, cautions, and warnings in this document
and the labels on the equipment.
Safety Statements
All safety instructions below should be read, understood, and applied under all relevant circumstances when working with this equipment.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of any polarized or ground ing-type plug. A polarized plug has two blades with one wider
than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for
your safety. If any provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect any power cord from being walked on or pinched; particularly at plugs, convenience receptacles, and the point where they
exit from the apparatus.
11. Use only attachments/accessories specified by the manufacturer, following all relevant safety precautions for any such attachments/
accessories.
12. Disconnect any outlet powered apparatus from its power source during lightning storms or when unused for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as a
damaged power supply cord or plug, liquid being spilled or objects having fallen into the apparatus, the apparatus being exposed to
rain or moisture, apparatus having been dropped, or other failure to operate normally.
14. To completely disconnect equipment from AC mains power, disconnect the power supply cord plug from the AC receptacle.
15. For applicable equipment, use the included power cord with the grounding prong intact to insure proper grounding of the device.
16. For any hardwired or fixed in-wall apparatus, carefully follow all wiring diagrams and instructions. All electrical wiring and servicing
should be performed by a properly licensed electrician.
FCC ID: 2A5L2AMP500