User's Manual

11
080-00001-00 AITEK USER MANUAL
Proprietary of Aitek Inc
9. MOUNTING GUIDE
Aitek’s Miner Plus hotspot gateway can be mounted in the following methods.
➢ Desktop: Place the gateway on a horizontal surface.
➢ Wall-mount: Hang the gateway on the wall using proper wall mounting
screws to fully secure the device.
RF Antenna placement – best practice for strong signal:
• Place the antenna in an open space where possible.
• Place the antenna at highest part of the house or structure where possible.
• Antenna should have minimal blockage from building material such as
concrete walls, sheet rock walls, metal beams, etc.
• Avoid obstructing the antenna with metal objects such as metal appliance,
metal door, etc.
• Try to place the antenna close to a window or balcony as possible, so the
antenna can provide a wider coverage.
Precautions:
※ The hotspot must be handled with care during installation process. Avoid
shocking or dropping of the product.
※ The working environment of the hotspot should be in a low dust area, with
good air circulation.
※ Avoid high humidity area where water condensation could damage the
hotspot.
※ This hotspot is not rated for direct exposure to water.