Instruction Manual

6
3. How to Connect
Transmitter
PC as A/V source: Connect PC’s VGA to the Transmitter’s VGA with the T-shaped VGA Bypass Cable and connect the PC’s audio output to Transmitter’s A/V
input with A/V cable and DC3.5 audio cable, as the picture below illustrates:
Connect to computer
Connect to Notebook
Connect the Notebook’s VGA to the Transmitter’s VGA with the T-shaped VGA Bypass Cable and attach the 75 Ohm Load Terminator to the Pass-Thru
Connector. Connect the PC’s Audio Output to Transmitter’s A/V Input with A/V cable and DC3.5 Audio Cable, as the picture below illustrates: