ASSEMBLY INTRUSION TWIN BED IMPORTANT NOTE 1. PLACE ALL PARTS ON A CLEAN AND SMOOTH SURFACE SUCH AS A RUG OR CARPET TO AVOID THE PARTS FROM BEING SCRATCHED 2. BEFORE YOU BEGIN, KINGLY FOLLOW THE ASSEMBLY INSTRUCTIONS STEP BY STEP 3.
Part list BOX 1: WF288467 A2 > Leg bed Leg bed (2 pc) Ad [Traction support bar pcs rail bed rails (1 pcs) B3 Headboard rails (1 pcs) B4 Bedside support bar 2 pcs Bedside support bar 2 pes v Bed slats 8 pcs C1 Front Drawer 1 pcs C2 Side brood Drawer box 2 pcs C3 A Back boar Drawer box 1 pcs ; bottom panel 1 pcs Page 2
Hardware list in WF288467 1/4" x 90 mm 1/4" x 25 mm 1/4" x 65 mm 1/4" x 15 mm Hex head bolts 6 pcs Hex head bolts 16 pcs | Hex head bolts 8 pcs | Horizontal-hole bolt 14 pes 256 m3 x10 Wood dowel 4 pcs Wood screws 22 pcs Wood screws 8 pcs Allen key 1 PCS x25 Wheels 4 pcs Compound bar 4 pcs connecting bar 2 pcs Wood screws 16 pcs =— (C=) Assemble tools required (Not included) Page 3
STEP © 1/4" x 15 mm 1/4" x 80 mm Horizontal-hole bolt-4 pcs | Hex head bolts 4 pcs Nat: Part 4 will face up with the "x" mark on it, otherwise it cannot be tightened Note: Part 4 will face up with the "x" mark on it, otherwise it cannot be tightened STEP ® [124* x 15 mm [Horizontal-hole bat 4 pos No 1/4" x85 mm Hex head bolts 8 pos 1/4” x 26 mm Hex head blats 4 pcs.
Note: Do not lock the screws of the bed slats to te outermost edge the bed slats, you need to leave a certain space at the edges, otherwise it will cause the board to break 12 Prove m4 x25 Wood screws 16 pcs
