Quick Guide

KDC80
QuickGuide


SeeReferenceManualformoredetailedinformation
Visitstore.koamtac.comtopurchaseadditionalKDCsandaccessories.   
QG_KDC80_20220303p7
InAlways‐pairingmode,anapplicationcanconnecttoaKDCwithoutreadingapairingbarcode,sotheconnection
procedureisalittledifferent.
a) IntheKTSyncapp,taptheConnecticonatthebottomleftoftheapp.
b) InKTSync,tap“STARTBLESCANNING”inthetopright.
c) InKTSync,checkthelistoffounddevices.
d) InKTSync,taptheKDC80listedbyserialnumberinbracketsfollowedby[BLE]thatmatchestheserialnumber
foundonthebacksideoftheKDC80.Theformatwilllooklikethis,KDC80[xxxxxx][BLE],wherexxxxxxisthe
serialnumber.
e) TheKDC80willbeepuponconnectionanddisplay“BLESPPConnected”onitsscreen.Nowitisreadytouse.

<Fig.4>
