Manualshelf

User's Manual

ManualsBrandsAISOLUTION ManualsElectronicsMobile POS
11121314151617181920
KDC User Manual APPLICATION
GENERATION
16
Revision 1.0
Copyright®2012-2015, KOAMTAC, Inc.
2. Installation
2.1 Bluetooth Pairing
The KDC500 can read and store barcode data independently, but it can also be used in
combination with a PC, PDA, smartphone, or tablet.
To use the KDC500 to read barcodes while it is paired with another device, the user
should first set up a pairing between the KDC and smart device via Bluetooth. If no
changes have been made in the smart device’s Bluetooth settings, the smart device will
always recognize the KDC500 that has previously been paired. However, if changes
have been made, the user will need to go through the pairing process again. The user
can also refer to Chapter 4. Bluetooth for more information about Bluetooth pairing.
1. Put the KDC500 into Pairing mode
Select and scan the correct pairing barcode below for your KDC model, or
KDC500L/KDC500Li (1D)
KDC500C/KDC500Ci (2D)
Pairing