User's Manual

KDC User Manual BLUETOOTH





4. Bluetooth -

KDC20/30/200/250/300/270/350/400/500

The KDC20/30/200/250/300/270/350/400 supports HID (Human Interface Device) normal, HID iOS,

SPP (Serial Port Profile) and SPP2.0 profiles. The KDC500 supports SPP only. The

KDC20i/30i/200i/250i/300i/270i/350i/400i/500i supports MFi (Made for iPhone/iPad/iPod touch)

profiles too. They are compatible with the following Bluetooth stacks:

z BlueSoleil

z Broadcom (Widcomm)

z Microsoft Windows XP, Vista, 7, 8, 10, and Mobile 5.0+

z Toshiba

For PCI PTS compliance, KDC500 can support only SPP and MFi profiles.

The KDC200/250/300/270/350/500’s Bluetooth options may be configured by using the KDC menu,

PC KTSync and special barcodes. The KDC20/30/400’s Bluetooth options may be configured by using

the PC KTSync and special barcodes.

4.1

Bluetooth Config

Connect Device

The KDC supports both Serial Port Profile (SPP) and Human Interface Device Profile (HID). The user

may choose amongst SPP2.0, SPP (2.1), HID normal, or HID iOS profiles to communicate with the host

device. An additional MFi (Made for iPhone/iPad/iPod touch) option is available for

KDC20i/30i/200i/250i/300i/270i/350i/400i/500i models when MFi mode is enabled.(SystemConfig

Menu). KDC500i doesn’t have MFi mode option and supports MFi by default.

If the BT Toggle option(KDC500 doesn’t support) in BT Config is enabled, the user may connect and

disconnect the Bluetooth connection with the host device by pressing the UP and DOWN buttons. It

normally takes 3 seconds to connect and 1 second to disconnect. This is a very useful feature for

iPhone and iPad applications.

The user may also enable and disable the iPhone and iPad soft keyboard instantly by using this BT

Toggle option in HID mode.

The UP button shows the Bluetooth connection status and the DOWN button shows the time when

this option is disabled.

0QVG