User's Manual

K
KDC User YOUR KDC

Smart Hopping
It enables KDC450U to find an optimized UHF channel and can be initiated by reading a special
barcode.
WIFI Config Menu (KDC350F)
KDC350F WiFi model can send and receive data to/from host by using the following protocols.
z UDP
z TCP
z HTTP_GET
z HTTP_POST
In UDP/TCP mode, KDC350F will support full duplex mode, meaning is the KDC350F will be ready to
get data from host all the time.
Power
z Turns the Wi-Fi Module Power ON and OFF.
AP
z Set AP SSID.
z Set AP Passcode.
Server
z Configure the following server information
IP Address
URL Address
Port Number
Protocol (UDP/TCP/HTTP-GET/HTTP-POST)
SSL(Security)
Server Page
Connect
z Connect to AP and server.
Auto Connect
z Enable/Disable KDC to reconnect to AP & Server when it detects disconnection from AP and
Server.