User's Manual

K
KDC User YOUR KDC

NFC Config Menu – KDC350N/411N/415N/421N/425N/500
NFC Power
z Turning NFC Power on or off
z Options: Enable/Disable
Data Format
z Options: Data only/Packet data.(KDC500 doesn’t support)
UID Only
z Enable or Disable UID Only menu
z The KDC only sends UID data to the host device when the KDC is in UID Only mode.
z (KDC500 doesn’t support)
UHF Config Menu – KDC450U
UHF Power
z Turning UHF Module Power On or Off
z Options: Enable/Disable
Power On Time
Specify the power on time duration of UHF module.
z Options: 500ms/1sec/1.5sec/2sec/2.5sec/3sec/3.5sec/4sec/4.5sec/5sec
Power Off Time
Specify the power off time duration of UHF module.
z Options: 500ms/1sec/1.5sec/2sec/2.5sec/3sec/3.5sec/4sec/4.5sec/5sec
Power Level
Specify the UHF module power level to determine the power strength of antenna. 7 means the most
power strength.
z Options: 0/1/2/3/4/5/6/7
Data Format
Specify the data format of UHF data when it is transmitted from KDC to Host.
z Options: Binary / Hexa Decimal