User's Manual

K
KDC User YOUR KDC


a period of time.
z Power Mode: The user may choose the type power consumption for the GPS function.
¾ Users may extend the battery life of the GPS enabled model in Power Save mode.
¾ Users should use normal mode if accurate GPS data is required.
¾ The KDC350G will last about 15 hours in normal non-bypass data mode and 18 hours
in power save non-bypass data mode.
¾ The KDC350G will last about 7 hours in normal bypass data mode and 8 hours in
power save bypass data mode.
z Bypass Data: Enabled or Disabled
¾ This option should be disabled if users wish to record the GPS data with a scanned
barcode data.
¾ The KDC will bypass GPS data to the host if the bypass option is enabled.
¾ The KDC becomes a Bluetooth GPS receiver if this bypass data option is selected.
z Acquire Test: Select to acquire GPS signal.
z Reset GPS: Reset KDC GPS module.
GPS Hot Key
The KDC250G/350G provides the following hot keys for convenient GPS operations:
z GPS Acquire Test Cancellation
¾ Users may cancel the GPS acquire test by pressing the SCAN button during the test.
z GPS Data Append Cancellation
¾ Users may cancel GPS data append by pressing SCAN button if GPS data is not
available immediately.
¾ Users should hold the SCAN button for more than 3 seconds to cancel GPS data
append.
USB Mode Menu– 100M/200M/250M/300M/270/350
Disabled
When this option is selected, KDC enters into USB Serial mode.
USB Disk