User's Manual

K
KDC User YOUR KDC


Read Integrated Chip (IC) Card(KDC500)
1. The paired host application sends a command to enable the IC Card Reader.
2. Insert IC Card into the IC Card slot located in the left side of KDC500. Make sure the IC of the card
face to up.
3.
The KDC500 will send the IC card data read to the paired host application.
Synchronizing data to the host device
Use the KTSync program to synchronize barcode data from the KDC to the host device. Please refer to
Chapter 5. Synchronization for details.