Manualshelf

User's Manual

ManualsBrandsAISOLUTION ManualsPOS EquipmentBarcode Scanner
31323334353637383940
K
KDC User Manual Installation

2. On the host device, go to Settings -> Bluetooth, and select the KDC that needs to be paired. The
KDC and host device will now communicate with each other.
For PCI PTS compliance, KDC500 requires Numeric Comparison method.
3.
After it has been installed, open KTSync and it will automatically find and connect to the KDC.
(Refer to 2.2 KOAMTAC Installation Wizard for more information about installing KTSync).
Second Option: Connect the host device from the KDC by scanning a Special Bluetooth MAC
Address barcode
Settings
Tap BBluetooth
Tap the KDC
0QVG
If the host device and KDC500 shows the same 6digit
number, press Pair/YES button on each device.