User's Manual

K
KDC User Manual Installation


2. Installation
2.1
Bluetooth Pairing
The KDC may read and store barcode data independently, but it may also be used in conjunction with
a PC, PDA, or smart device.
In order to read barcode data with your KDC wirelessly, the user must first pair the KDC and smart
device via Bluetooth. If previously paired and no changes have been made in the smart device’s
Bluetooth settings, the smart device will always recognize the KDC that has previously been paired.
However, if changes have been made, the user may need to go through the pairing process again. The
user may also refer to Chapter 4. Bluetooth for more information about Bluetooth pairing.
Preparing for Pairing
Select a Bluetooth profile. There are two ways to set up a Bluetooth profile. The user may establish a
Bluetooth profile manually (on the scanner) or by scanning a programming barcode as shown below.