User's Manual



6.2
Predefined Applications
KTSync provides four Predefined Applications: Master/Slave, Pick/Bin, DB Lookup and Inventory.
Master/Slave
Master/Slave predefined application enables you to define a master barcode for comparison with
one or more slave barcodes. The predefined application may be run once or continuously. Within
either setting, you may define a substring for comparison of master and slave barcodes.
Master/Slave Onetime
Define one master barcode and compare it with one slave barcode.
Master/Slave Continuous
Define one master barcode and compare it with multiple slave barcodes.
Collation Options
Works in either Onetime or Continuous Mode to compare a substring within the master and slave
barcodes.
z Master start position - Select the numeric position of start substring character in Pick
barcode, 1 to 255.
z Slave start position - Select the numeric position of start substring character in Pick
barcode, 1 to 255.
z Comparing Barcode Length - Number of characters to be compared, 0 to 255. 0 means all
characters.
Pick/Bin
The Pick/Bin predefined application is a special version of the Master/Slave predefined application.
The Pick/Bin application enables you to define the Pick ID and the barcode symbology for
comparison with a defined Bin.
Figure 36 - Master/Slave Application Settings