User's Manual



6. Application Generation
KDC FW2.85 does not support the Application Generation feature. Users should
upgrade FW2.85 to FW2.86 or FW3.0+ to use Application Generation feature.
When you select the Application menu from the KTSync, the user may choose from the following five
Applications: Generation, DB Lookup, Master/Slave, Pick/BIN, and Inventory. Users may also
download saved programs using the Import & Download option.
When the Application tool is selected, the KDC will beep once to acknowledge a connection between
the KDC and the Application tool. The following KTSync warning window will pop up if the
downloaded application in KDC does not match with KTSync application tool.
KDC will wedge barcode data to the host in application mode if “wedge and store always”
option in data process menu is selected and KDC firmware version is higher than
2.86.xxx.G or 3.0+.
6.1
Application Generation
KDC Application Generation tool is a robust feature that enables the user to create custom
applications for collecting and managing barcode data. To create a custom application, select the
Generation submenu from the Application menu in KTSync
®
.
0QVG
0QVG
Figure 32 - Application Menu
Figure 33 - Application Warning Window